|
| Have a 2009 9770 and have owned it for 8 years. Moisture sensor never worked and so we have always tolerated the two error messages
Moisture sensor relay problem
Moisture sensor motor stalled.
The messages come on about every 20 min or so and just click the button to make them go away.
Still use the mass flow sensor to map and manually plug in a moisture figure, and have some approximate mapping this way.
We are attempting to get rid of the annoying beeping but also retain use of the Deere mass flow sensor and Deere monitor for mapping.
Any advice on how to do so?
We tried replacing the relays and also manually disconnecting the plunger (which has always been screwy) and that did not fix anything
Was hoping someone out there had a resource for a “plug” that would fit onto the harness end for the moisture sensor that would “jump” the correct wires, to essentially trick the computer into thinking the monitor was functioning | |
|
9770 moisture sensor help
