|
Northern Indiana | A GS3 CommandCenter can run any signal level SF1/SF2/SF3/RTK/mRTK/SF-RTK so long as it is on an AutoTrac ready vehicle and has an AutoTrac activation.
AutoTrac SF1 on a GS3 CommandCenter will only allow running on SF1.
AutoTrac SF2 or just plain AutoTrac activation will allow any of the above signal levels
The layout of the receiver and other configuration pages will be more like an 1800 display, but they will be fully functional
Some aftermarket products do not support the smaller screen size well or at all
Edited by 4wdaaron 1/7/2025 14:56
| |
|
Gs3 command center with rtk
