roaming | Breck_20 - 10/8/2024 09:40
Hey everyone I recently purchased a 07 Cr9060 that was gps/mapping capable. I have an Intelleview 2 monitor and a Trimble ag 25. I can't find anywhere to plug in the gps into the combine. Do i need some other cables? I have an auto steer monitor I believe it is the FM-750. Do I need to connect into that and then go to the Intelleview?
The Ag25 is the antenna for the GPS receiver that is built in to the FM-750. So you need Ag25 on the roof, connected to the FM-750 in the cab, and then the FM-750 connected to the combine harness to send RS232 GPS to display. However, your bigger problem is that the IntelliView II will not do yield mapping. So you would need to upgrade your display to something newer. An IntelliView Plus II would do it, but you'll probably be happier with an IntelliView IV.
https://talk.newagtalk.com/forums/thread-view.asp?tid=509351&Display...
Edited by torn 10/8/2024 15:18
|
cr9060 Data mapping
