|
Holland, Indiana (SW IN) | I've been asking lots of questions on NAT about drone setups since seems other NAT members are contemplating doing same
SO here's what this year looks like -will be a different setup next year --need to get by this year
Got the Diesel generator to work "can use all 3 legs of the 3 Phase"
Get 208V between any 2 of the legs any leg to Neutral is 120V
running the battery charging setup on 208V --we're adding another charging station (tomorrow) to keep up
Ended up with 3 electric pumps the one filling the drone is settable to auto turn off when reaches 30 PSI
pool pump on low for agitation other pump for clean water
Heck got only $500 in all three pumps Seems to work great with the pump setup we have
Adding another 4 feet out the back "landing pad" drone doesn't like being close to anything
Thanks for the help NAT --any critiques or questions appreciated -- It'll be different net year
Dan
PICS coming and tell the tale
Edited by Dan Loehr 7/14/2024 09:43
 (IMG_3491 (full).jpeg)
 (IMG_3560 (full).jpeg)
 (IMG_3556 (full).jpeg)
 (IMG_3555 (full).jpeg)
 (IMG_3558 (full).jpeg)
 (IMG_3559 (full).jpeg)
Attachments
----------------
 IMG_3491 (full).jpeg (126KB - 175 downloads)
IMG_3560 (full).jpeg (165KB - 166 downloads)
IMG_3556 (full).jpeg (139KB - 157 downloads)
IMG_3555 (full).jpeg (145KB - 158 downloads)
IMG_3558 (full).jpeg (171KB - 164 downloads)
IMG_3559 (full).jpeg (156KB - 154 downloads)
| |
|
DroneT 40 results SO far Plenty of pics
